We make it easy to get started with a completely free quote.
Product Air provides furnace, heat pump, and AC repair, installation, and maintenance in Bothell, WA, along with residential electrical troubleshooting. We identify the problem before recommending a repair or replacement, then explain the findings and work you would be approving.
The right repair starts with finding the problem. A new system starts with understanding your home.
If the furnace stops heating, the AC runs without cooling, or a breaker keeps tripping, our HVAC and electrical teams can assess the relevant equipment. For planned system upgrades, we review the house and provide a written estimate covering the approved scope.
Furnace and heat pump repair | AC service and installation | Home electrical troubleshooting
Request HVAC or Electrical Service
Call or text (425) 340-3576. Tell us your Bothell address and what the system is doing. Product Air advertises free in-home installation estimates. Diagnostic visit terms and current appointment availability should be confirmed when booking.
A Bothell AC Repair That Did Not Require a New System
In July 2026, Sue called Product Air because the AC at her Bothell 98021 home had stopped cooling. The Trane XR outdoor unit was only about a year old. Technician Robert tested the system and traced the problem to a failed capacitor. He replaced the part and checked that the equipment could start and run normally again.
The capacitor replacement had been quoted at $498.67, but the applicable warranty covered the repair, leaving $0 out of pocket for this specific customer. The rest of the AC was in good condition, and there was no reason to recommend replacement. The work was completed during the July 23, 2026 visit because the correct part was available on the truck.
Read the Bothell AC diagnostic and capacitor repair case. The price, warranty coverage, and completion time are historical details of Sue's job. They are not standard repair prices or guarantees for other appointments.
That case illustrates why we check equipment age, condition, and applicable warranty information when investigating a failure. A no-cooling complaint does not automatically mean the compressor or the entire system needs replacing.

Heating Repair and Installation in Bothell
Our heating services cover existing systems that need attention and new equipment designed for the home.
Furnace Repair When Your Home Is Losing Heat
A furnace may fail during startup, deliver weak airflow, or shut down before a full heating cycle. Tell us whether the thermostat responds, how long the system runs, and whether any error code appears. We use the symptoms to guide tests of the equipment, including ignition and combustion-safety components when the system is gas-fired.
Product Air provides furnace repair and maintenance for existing heating equipment. If a technician finds a failed component, the recommendation should explain which problem its replacement would address. An older furnace can still be worth repairing when the rest of the equipment is suitable for continued use.
Heat Pump Repair for Heating or Cooling Problems
Heat pumps provide both heating and cooling, so an issue may appear in one mode or both. In Western Washington's damp winters, a brief defrost cycle is normal. Persistent heavy ice and declining indoor heat call for an inspection. We can check airflow, system controls, and other components indicated by the complaint.
Our heat pump repair service covers ducted and ductless equipment. If the issue is intermittent or a part needs to be ordered, we explain what remains to be done before arranging the next step.
New Furnaces and Heat Pump Installation
If you want to replace unreliable heating or add cooling, we first look at the equipment already installed. A gas furnace may be replaced with a new furnace, a ducted heat pump, or a compatible dual-fuel arrangement. Homes without suitable ducts may be candidates for a ductless mini-split system.
Product Air installs equipment from manufacturers including Mitsubishi, Trane, Coleman, and Midea. We help compare models according to the home's heating and cooling load, the rooms being served, and the overall scope. You can explore our heat pump installation and furnace installation and replacement services before requesting a proposal.

AC Repair, Maintenance, and Cooling Options
A central air conditioner that runs constantly while rooms stay warm may have restricted airflow or a problem with its electrical or refrigeration components. The technician needs to test the system before identifying the failed part. Sue's Bothell case is a reminder that the trouble can come from one electrical component even when the AC is relatively new.
Product Air provides AC repair, AC maintenance, and air conditioning installation and replacement. If the equipment has reached the point where replacement makes more sense, we can discuss central cooling through suitable existing ducts or a heat pump that also supplies heating.
If a bedroom or addition has no usable duct connection, a ductless option may serve that space. We need to review how the room is used, where the indoor unit could go, and where the refrigerant and condensate connections would run.
Electrical Troubleshooting and HVAC Work Through One Company
Product Air has a dedicated residential electrical service, which is useful when a new HVAC system needs a circuit or when your home's power problem has nothing to do with heating or cooling. We can coordinate in-scope electrical and HVAC work under the same project proposal.
Lights Flicker or Dim
Tell us whether the problem affects one fixture or several rooms. An electrician can check the relevant connections and circuit conditions. Flickering when a large appliance starts is useful information, but it does not establish the cause by itself.
An Outlet Stops Working
A failed receptacle or an upstream protective device can interrupt power. Product Air offers electrical outlet repair and troubleshooting. Do not continue using an outlet that feels hot, is discolored, or has a burning odor.
A Breaker Trips Repeatedly
A breaker may trip because the circuit is overloaded or has a fault. Leave it off if it continues to trip. Our electrical troubleshooting team can investigate before recommending repairs or a panel upgrade.
A heat pump or EV charger installation does not automatically require a 200-amp panel. Any electrical service upgrade should follow a qualified review of the current panel and expected load. Homeowners should not open panels or attempt wiring repairs. For active sparking, smoke, or a suspected gas leak, move to safety and contact emergency services or the gas utility as appropriate before arranging routine service.
How We Choose a Heating and Cooling Setup for Your Home
A new HVAC system must be matched to the house it serves. We evaluate the existing equipment and discuss which rooms need better heating or cooling. The installation proposal needs to account for the following practical questions.
Can the ducts do the job? Existing forced-air ducts may be suitable for a ducted heat pump, but their condition and return-air capacity affect airflow. We assess whether changes are needed before recommending a replacement unit.
Would ductless equipment solve a specific room problem? A ductless system can serve selected areas, including spaces without a central duct connection. The plan should identify where the indoor units will sit and how the rooms will be covered.
What electrical work is actually required? Some new systems need dedicated circuits or other electrical changes. We assess the electrical requirements and include the agreed work in the scope. A new panel is recommended only when the existing supply and calculated load justify it.
Product Air is a Mitsubishi Elite Diamond Contractor. Qualifying Mitsubishi residential systems installed by a Diamond Contractor and registered within 90 days are eligible for a 12-year limited parts and compressor warranty. Product Air also provides a five-year installation labor warranty on new HVAC installations. Manufacturer coverage and our labor warranty are separate, and the applicable terms are explained in your installation proposal.
From Your First Call to the Approved Work
1. Describe what changed. Tell us about the temperature in the house, noises, thermostat messages, or electrical symptoms. A model number helps if you have it, but is not required to request an appointment.
2. We assess the equipment. The technician selects tests based on the installed system and complaint. An intermittent problem or unavailable component may require follow-up.
3. Review your options and the estimate. A repair recommendation should identify what failed. If replacement is worth discussing, the proposal should name the equipment and identify any needed duct, electrical, or permit work.
4. We complete the approved scope and check operation. For an installation, we also explain the controls and applicable warranty paperwork. When more work is required, the team should communicate the next step before it proceeds.
This reflects the idea behind Your Tech Brother From Another Mother: practical explanations from people who want you to understand the decision you are making. Read customer experiences on HomeAdvisor for additional feedback.
Bothell HVAC Costs, Installation Estimates, and Financing
A repair price depends on the confirmed fault and the parts and labor involved. The $498.67 capacitor quote in Sue's case was tied to her particular system, and her $0 payment resulted from warranty coverage. It should not be used as a price prediction for a different job.
Product Air advertises free in-home installation estimates and written project proposals. Our published heat pump installation pricing begins at $11,999, depending on equipment and scope. Ask for the current price applicable to your Bothell project, including any duct or electrical work. Diagnostic service visits may have separate charges and conditions.
Financing options are available for eligible projects, subject to credit approval and current lender terms. We can discuss which written manufacturer and installation warranties would apply to the selected equipment. Do not rely on a generic promotion or an older case's coverage as a guarantee for a new purchase.
For ongoing care, Product Air also offers HVAC maintenance agreements. Regular service follows the equipment manufacturer's instructions and may uncover developing problems, although it cannot prevent every breakdown.
Permits and Rebates for Bothell Homes
Bothell extends across King County and Snohomish County. The utility serving your specific property matters when looking for heat pump rebates, so confirm whether your account is with Puget Sound Energy or Snohomish County PUD before assuming a particular program applies.
A new furnace or heat pump can require mechanical permitting, and some projects involve separate electrical permits. We discuss permits and inspection responsibilities as part of the proposed installation. Requirements need to be checked for the property's jurisdiction and exact scope.
Utility rebate availability and equipment rules may change. The federal Section 25C energy-efficient home improvement credit is not available for systems placed in service after December 31, 2025, so older online guides should not be treated as current 2026 incentives.
Indoor Air Quality and Ongoing Home Comfort
If some rooms stay warmer than others or dust accumulates rapidly, the equipment may be operating while airflow or filtration needs attention. Product Air offers indoor air quality services and can discuss compatible filtration options and air distribution with your HVAC project.
We do not perform duct cleaning in-house. Those requests are referred to partner providers. Filtration equipment also cannot correct a hidden moisture or water intrusion problem, which needs to be addressed at its source.
Get Heating, AC, or Electrical Help in Bothell
Tell Product Air what is happening in your home, or what you want a new system to improve. We can explain the next appointment and prepare an estimate for the work once the equipment or property has been assessed.
Request a Bothell Service Visit or Installation Estimate
Call or text (425) 340-3576. Current appointment times and any emergency or after-hours availability must be confirmed when you contact the office.